Motorglider Propellors

This is the remains of a pitch change mechanism bearing from a Dimona H36. It is desirable that the clearance from the pitch change plate on these bearings be part of the DI. The clearance should be around 1mm.

H36 Hoffman Prop static rpm: (G109 abour the same)
Propellor fine static max RPM 2700-2900 
Propellor coarse static max RPM 2300 

HOFFMAN PROPELLOR
Prop pitch change lever bearings for Dimona H36  - 608 2RS (two off). These are larger than G109.
Prop flange nuts differ to those used on G109.
H36 and G109A accept same prop, but spinner and spinner baseplates differ, G109 is larger.